Description: Wel-Cote Patching Plaster is a white, lime-free, non-shrinking patching compound. It is used for fast, low cost repairs of interior plaster and drywall surfaces. Its unique formulation produces a plaster that is easily worked. It trowels smoothly without pulling away from patched areas, and leaves a patch of maximum strength, long life, and hardness.

Surface Preparation: Surface to be repaired should be free of all dirt and loose material.

Mixing: Mix only as much material as can be used in 30 minutes. Mix 1 part of water to two parts of powder. Use cool water, and mix to a smooth consistency.

Application: Apply Patching plaster with a trowel or putty knife to the area to be repaired. Smooth surface to reduce sanding.

Equipment: Wel-Cote Patching Plaster can be applied with a trowel or putty knife.

Finishes: Patching Plaster can be finished smooth or textured to match the surrounding wall surface.

Dry time: Allow 1 hour of dry time before sanding or painting. Deep repairs may require additional dry time.

Coverage (approximate): 1 pound of Patching Plaster will cover 1ft² at 1/8" depth.

Caution: In case of contact with eyes, flush with water and seek medical attention.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warranty shall in no case exceed the purchase price of the quantity of Welco product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.

Architectural Specifications: None

Last modified: 09/19/07