Description: Wel-Cote Quick-Fill is a fast-setting product used for leveling and smoothing interior wood and concrete surfaces where moisture is not present. The use of wood fibers and unique binders allow it to be tacked, nailed, sawed, drilled or screwed into when dry. Ideal for use under linoleum and floating wood floor systems.

Surface Preparation: Surface should be dry, firm and free of all loose material. If flooring is on or below grade, or there is excess moisture, apply a sealer before using Quick-Fill

Mixing: Mix 1 cup (8 oz.) 0f water per pound of Quick-Fill. Stir thoroughly before use. Do not mix more material than can be used in 15 minutes.

Application: Apply to dry surface making sure to feather edges.

Equipment: Wel-Cote Quick-Fill can be applied with a trowel, putty knife, broad knife or squeegee.

Finishes: Smooth material to the level of surrounding surface.

Dry time: Allow 24 hours to dry before applying adhesive or new flooring. Deeper fills and areas with high humidity may require additional drying time.

Coverage (approximate): Two pounds of material will cover 1 ft² at ¼" depth.

Caution: In case of contact with eyes, rinse with water and seek medical attention if redness or swelling persists.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warranty shall in no case exceed the purchase price of the quantity of Welco product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.

Architectural Specifications: None

Last modified: 09/19/07