Surface Preparation: Remove all previous wall covering(s). Use warm water and Wel-Cote Trisodium Phosphate, or other suitable cleaner, to remove old paste from wall. Prime and size wall after cleaning and prior to applying new wall covering.

Mixing: No mixing is required. Product is ready to use straight from the container. Stir contents prior to use.

Application: Apply paste to the back of the new wall covering. Fold the strip so that the unpasted sides are folded on each other.

Equipment: Use a pasting brush or wide paint brush to apply paste.

Finishes: Use a squeegee to smooth out the wall covering, making sure to work from the inside out.

Dry time: Wall covering can be repositioned after application in the first 5-10 minutes. Allow to dry for 24 hours.

Coverage (approximate): One gallon will cover approximately 130-180ft² depending on the weight and porosity of wall covering being hung.

Caution: In case of eye contact, rinse thoroughly with water and seek medical attention if redness or swelling persists. Wash hands after handling, and before eating.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warranty shall in no case exceed the purchase price of the quantity of Welco product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.

Architectural Specifications: None

Last modified: 09/19/07