Description: Wel-Cote Spackling Compound is a setting-type dry product formulated for interior surfacing and repairing prior to painting or decorating with wall covering. It can be used on all above-grade interior surfaces such as wood, drywall and plaster. It can also be used for decorative texturing.

Surface Preparation: Surface to be repaired should be free of all dirt, oil and loose material.

Mixing: Spackling Compound should be mixed at a ratio of 8 oz. of water per pound of powder. Do not mix more material than can be used in 60 minutes.

Application: Apply Spackling Compound directly to the clean surface to be repaired.

Equipment: Wel-Cote Spackling Compound can be applied with a putty knife, broad knife or trowel. Spray equipment should be avoided because the material chemically reacts with water, and will set up in this type of equipment.

Finishes: Spackling Compound can be decorated with hand tools or other plaster decorative tools. Material should be primed prior to painting or applying wall covering.

Dry time: Allow 90 minutes for product to set up. Dry time is approximately 12 hours depending on depth of repair and environmental conditions.

Coverage (approximate):  A 25lb. bag will cover approximately 5ft² at ¼" depth.

Caution: In case of contact with eyes, rinse with water and seek medical attention if redness or swelling persists.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warranty shall in no case exceed the purchase price of the quantity of Welco product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.

Architectural Specifications: None

Last modified: 09/19/07