Description: Wel-Cote Ready Mixed Tile Grout is a ready to use grout that resists shrinking and cracking. It is water proof and stain resistant.

Surface Preparation: Remove all loose material. Dampen the area prior to application.

Mixing: Ready Mixed Tile Grout is ready to use straight from the container. If there is any separation, stir contents thoroughly before use. Product can be tinted with any universal tint prior to use.

Application: Apply Tile Grout diagonally across the grout lines making sure to completely fill the void. After the grout has started to set, 15-30 minutes, wipe of excess grout with a sponge. Buff tile with a soft cloth after material has dried to a haze.

Equipment: Apply Tile Grout with a stiff rubber float or squeegee designed for the application of grout. Use a stiff sponge to wipe off excess grout.

Finishes: Tile Grout should completely fill the space between the tiles. Fill the void only to the point where the side of the tile is covered. Do not over fill the joint, as Tile Grout may break loose from the surface of glazed tiles.

Dry time: Allow 24-48 hours of dry time before applying a quality grout sealer.

Coverage (approximate): One pint will cover 15ft² of ceramic tile.

Caution: In case of eye contact, rinse thoroughly with water and seek medical attention if redness or swelling persists. Wash hands after handling, and before eating.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Welco shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Welco liability under this warranty shall in no case exceed the purchase price of the quantity of Welco product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.

Architectural Specifications: None

Last modified: 09/19/07